1d 1h
Estimated runtime for starlink mini.
Menu
Model by device runtime
EcoFlow DELTA 2 Starlink Mini Runtime Estimate
A Starlink Mini estimate using DELTA 2 USB-C output instead of assuming AC. The estimate uses the same runtime engine as the main calculator and keeps source confidence visible.
meets this planning target
8-hour planning target.
USB-C PD
Output path with 100 W tracked output limit.
This estimate assumes 32 W running draw, 100% duty cycle, 90% efficiency, and 10% reserve.
Runtime Range
Use the range to plan around temperature, battery condition, and measurement uncertainty.
Conservative16h 19m
Estimated1d 1h
Optimistic1d 8h
Assumptions
These are calculation inputs, not lab-tested runtime claims.
- 1024 Wh nominal battery capacity
- USB-C PD output path
- 90% conversion efficiency
- 10% reserve kept unused
- 32 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Sources
Station facts and scenario wattage notes stay separated so the estimate is easier to audit.
Station Sources
- EcoFlow DELTA 2 specifications (official)
Scenario Sources
- Starlink specifications (official)
Confidence
Station: Verified. Scenario: Estimated. Last station verification: 2026-06-24.
Runtime Sensitivity
These computed checks show how reserve, battery health, and temperature assumptions move the estimate before you trust one number.
Current assumptions
1d 1h
10% reserve, 100% battery health, 0% temperature loss.
- 829 Wh usable energy
- 32 W average load
Higher reserve
23h 2m
20% reserve, 100% battery health, 0% temperature loss.
- 737 Wh usable energy
- 32 W average load
Cold or aged battery
19h 50m
10% reserve, 90% battery health, 15% temperature loss.
- 635 Wh usable energy
- 32 W average load
Nearby station estimates
Compare this result with nearby source-linked model pages for the same device scenario.
EcoFlow DELTA 3 Classic
1d 1h estimate with 10% reserve and 32 W default load.
Goal Zero Yeti 1000 LiFePO4
1d 1h estimate with 10% reserve and 32 W default load.
Anker SOLIX C1000
1d 2h estimate with 10% reserve and 32 W default load.
Next Steps
The estimate above is this page's answer for the stated assumptions. Use these links to review the sources or rework the inputs.
Review the model
Review the scenario
Adjust the assumptions
Interactive tool for changing wattage, reserve, or output path — not a citable answer page.
FAQ
Short answers for this model and device pair.
How long will EcoFlow DELTA 2 run starlink mini?
Using the current assumptions, the estimate is 1d 1h. Real runtime depends on device settings, output path, temperature, battery age, and measured wattage.
Is this a guaranteed runtime?
No. It is a planning estimate from source-linked station specs and scenario wattage assumptions. Use a watt meter and manufacturer guidance for critical backup planning.