1d 1h
Estimated runtime for starlink mini.
Model by device runtime
Goal Zero Yeti 1000 LiFePO4 Starlink Mini Runtime Estimate
A Starlink Mini estimate using the Yeti 1000 LiFePO4 USB-C PD path. The estimate uses the same runtime engine as the main calculator and keeps source confidence visible.
meets this planning target
12-hour planning target.
USB-C PD
Output path with 140 W tracked output limit.
This estimate assumes 32 W running draw, 100% duty cycle, 90% efficiency, and 10% reserve.
Runtime Range
Use the range to plan around temperature, battery condition, and measurement uncertainty.
Conservative15h 55m
Estimated1d 1h
Optimistic1d 7h
Assumptions
These are calculation inputs, not lab-tested runtime claims.
- 998 Wh nominal battery capacity
- USB-C PD output path
- 90% conversion efficiency
- 10% reserve kept unused
- 32 W average load from 1 load
- 100% battery health
- 0% temperature loss
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Sources
Station facts and scenario wattage notes stay separated so the estimate is easier to audit.
Station Sources
- Goal Zero Yeti 1000 LiFePO4 specifications (official)
Scenario Sources
- Starlink specifications (official)
Confidence
- Station: verified
- Scenario: estimated
- Last station verification: 2026-06-24
Next Steps
Refine this estimate if your actual device wattage or power path is different.
Adjust the calculator
Review the model
Review the scenario
FAQ
Short answers for this model and device pair.
How long will Goal Zero Yeti 1000 LiFePO4 run starlink mini?
Using the current assumptions, the estimate is 1d 1h. Real runtime depends on device settings, output path, temperature, battery age, and measured wattage.
Is this a guaranteed runtime?
No. It is a planning estimate from source-linked station specs and scenario wattage assumptions. Use a watt meter and manufacturer guidance for critical backup planning.