WattRunTime.com
Language

Anker SOLIX F3000 Runtime Calculator

Quick answer: the Anker SOLIX F3000 stores 3,072 Wh and delivers up to 3,600 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 23.5 hours. Last source check: 2026-10-25. This is an estimate, not a guarantee.

Anker SOLIX F3000 portable power station
Battery capacity3,072 Wh
AC output3,600 W
Surge output7,200 W
Battery chemistryLFP
ConfidenceEstimated
Source regionUS source
checked2026-10-25
Anker SOLIX F3000: Key facts
Battery capacity3,072 Wh
Battery chemistryLFP
AC output3,600 W
Surge output7,200 W
DC outputunknown
USB-C output100 W
Solar input2,400 W
Weight41.5 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionUS source
Last verified2026-10-25
Catalog notes (original English)

US 120V A1782 F3000 base station. DC watts remain unknown because the exact official table and manual give Anderson 13.4V/30A and car 12V/10A profiles without an explicit watt ceiling; the former 402W value was an inferred voltage/current product. This does not mean DC output is absent. SurgePad is listed separately from AC surge power: 4860W appliance-support mode versus 7200W explicitly published surge. AC 3600W is total; each NEMA 5-20R outlet is limited to 2400W and the TT-30R path is 3600W. Solar 2400W uses both high-PV 1600W and low-PV 800W paths within their separate voltage limits. The 6000W hybrid-recharging claim requires an expansion battery and is not standalone output power.

Regional source note Some specs are cross-checked against official regional pages. Regional SKUs can differ; verify the manufacturer page for your market before purchase or emergency planning. ankersolix.com: Anker SOLIX F3000 technical specifications, support.ankersolix.com: Anker SOLIX F3000 US A1782 user guide

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 15%13h 27m
Within the tracked power limits; compatibility still needs checking		EstimatedOpen estimate
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%2d 7h
Within the tracked power limits; compatibility still needs checking		EstimatedOpen estimate
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%3d 7h
Within the tracked power limits; compatibility still needs checking		EstimatedOpen estimate
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%8d 10h
Within the tracked power limits; compatibility still needs checking		EstimatedOpen estimate
LED TV100 W · 100% · AC inverter · Reserve: 10%23h 30m
Within the tracked power limits; compatibility still needs checking		EstimatedOpen estimate
Adjust these assumptions in the runtime calculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 3072 WhAC inverter: 3600 WSurge output rating (W): 7200 W
Anker SOLIX F3000
Estimated runtime1d 15h1d 0h – 2d 0h

Within the tracked power limits; compatibility still needs checking

Estimated runtime: 1d 15h. 1d 0h – 2d 0h. Within the tracked power limits; compatibility still needs checking
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

1d 15hEstimated runtime: 1d 15h. 1d 0h – 2d 0h. Within the tracked power limits; compatibility still needs checking

This setup has comfortable headroom for overnight use, assuming the wattage estimate is realistic.

Conservative1d 0h
Estimated1d 15h
Optimistic2d 0h

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
3072 Wh
Usable energy
2350 Wh
3072 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
1d 15h
2350 Wh / 60 W = 1d 15h
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

WattRunTime.com

WattRunTime estimate

Estimated runtime

1d 15hThis setup has comfortable headroom for overnight use, assuming the wattage estimate is realistic.
Usable energy2350 Wh
Average load60 W
Fixed station overheadUnknown (not included)
Running watts60 W
Max surgen/a

Runtime range

Conservative1d 0h
Estimated1d 15h
Optimistic2d 0h

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Usable energy2350 Wh3072 Wh x 85% x 90% x 100% x 100%
Fixed station overheadUnknown (not included)60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime1d 15h2350 Wh / 60 W = 1d 15h

Assumptions

  • 3072 Wh nominal battery capacity
  • AC inverter output path
  • 85% conversion efficiency
  • 10% reserve kept unused
  • 60 W average load from 1 load
  • 100% battery health
  • 0% temperature loss
  • Fixed station overhead unknown; not included

Warnings

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Planning notes

  • Capacity class: 3,072 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 3,600 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: 2,400 W. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 41.5 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: DC output

Models: Anker SOLIX

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources