Scenario-anchored comparison

EcoFlow DELTA 2 vs BLUETTI AC180 for Full-size refrigerator

Same device load, same runtime assumptions, and source-backed station specs. This is a planning estimate, not a measured runtime test.

Scenario verdict

Full-size refrigerator: 500 W · 33%

Neither station clears the known load checks

A runtime shown beside a failed or unknown fit is conditional: it applies only if the load starts and stays within the station limits.

EcoFlow DELTA 2

  • Overall load fit: Does not fit
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,700 W · Fit: Does not fit
  • Modeled runtime: 4h 45m (if the load starts)

BLUETTI AC180

  • Overall load fit: Does not fit
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,700 W · Fit: Does not fit
  • Modeled runtime: 5h 20m (if the load starts)

Specification comparison

A runtime shown beside a failed or unknown fit is conditional: it applies only if the load starts and stays within the station limits.

Swipe table sideways
Specification comparison
Key factsEcoFlow DELTA 2BLUETTI AC180
Modeled runtime4h 45m (if the load starts)5h 20m (if the load starts)
Overall load fitDoes not fitDoes not fit
Battery capacity1,024 Wh1,152 Wh
AC output1,800 W1,800 W
AC output · FitPassPass
Device startup demand2,900 W2,900 W
Surge output2,700 W2,700 W
Surge output · FitDoes not fitDoes not fit

Planning inputs and evidence

The same source-backed load and calculation assumptions are used for both stations.

Load assumptions

  • Typical wattage range: 300-800 W
  • Planning default: 500 W
  • Device startup demand: 2,900 W
  • Average load: 33%
  • AC output: AC · 85%
  • Reserve: 10%
  • Confidence: Estimated

Check sources and assumptions

Open the parent records before using this estimate for a purchase or backup plan.

Full-size refrigerator

Fridges cycle on and off. The calculator treats the entered wattage as compressor running wattage and applies a duty-cycle estimate.