BLUETTI AC180 Runtime Calculator

Quick answer: the BLUETTI AC180 stores 1,152 Wh and delivers up to 1,800 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 8.8 hours. Last source check: 2026-08-21. This is an estimate, not a guarantee.

BLUETTI AC180 portable power station
Battery capacity1,152 Wh
AC output1,800 W
Surge output2,700 W
Battery chemistryLiFePO4
ConfidenceVerified
Source regionGlobal/general sources
checked2026-08-21
Swipe table sideways
BLUETTI AC180: Key facts
Battery capacity1,152 Wh
Battery chemistryLiFePO4
AC output1,800 W
Surge output2,700 W
DC output120 W
USB-C output100 W
Solar input500 W
Weight16.4 kg
ConfidenceVerified
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-08-21
Catalog notes (original English)

The manual separately publishes 2700W surge capability and a 2700W resistive-load Power Lifting mode; the stored surge value is backed by the explicit surge statement, not inferred from Power Lifting.

Measurement Records

Third-party results apply to the listed model, output path and test load. The delta is against a fixed no-reserve planning formula, not an error score or a prediction at other loads. Missing test conditions remain unknown.

Swipe table sideways
Measurement Records: BLUETTI AC180
TestMeasureddefault planning estimateVs estimateSource
Runtime test (AC)
Average test load: ~380 W
test date unknown
980 Wh
85%
979 Wh+1 Wh (0%)Outdoor Life Best Portable Power Stations of 2026
2026-01-09; accessed 2026-09-04
Runtime test (AC)
Average test load: ~34 W
test date unknown
620 Wh
54%
979 Wh-359 Wh (-37%)Outdoor Life Best Portable Power Stations of 2026
2026-01-09; accessed 2026-09-04

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%5h 20m
Exceeds a tracked power limit — do not rely on these hours
EstimatedOpen estimate
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%20h 48m
Within the tracked power limits; compatibility still needs checking
EstimatedOpen estimate
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%1d 5h
Within the tracked power limits; compatibility still needs checking
EstimatedOpen estimate
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%3d 4h
Within the tracked power limits; compatibility still needs checking
EstimatedOpen estimate
LED TV100 W · 100% · AC inverter · Reserve: 10%8h 49m
Within the tracked power limits; compatibility still needs checking
EstimatedOpen estimate

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 1152 WhContinuous output rating (W): 1800 WSurge output rating (W): 2700 W
BLUETTI AC180
Estimated runtime14h 41m9h 12m – 18h 14mEstimated runtime: 14h 41m, 9h 12m – 18h 14m
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

14h 41mEstimated runtime: 14h 41m

This setup has comfortable headroom for overnight use, assuming the wattage estimate is realistic.

Conservative9h 12m
Estimated14h 41m
Optimistic18h 14m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
1152 Wh
Usable energy
881 Wh
1152 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
14h 41m
881 Wh / 60 W = 14h 41m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Planning notes

  • Capacity class: 1,152 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 1,800 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: 500 W. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 16.4 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: —

Models: BLUETTI

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Specification comparison

Use these as planning shortcuts, then confirm the full table and sources.

Sources