WattRunTime.com
Language

Renogy Phoenix 200 Runtime Calculator

Quick answer: the Renogy Phoenix 200 stores 222 Wh and delivers up to 200 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 1.7 hours. Last source check: 2026-07-10. This is an estimate, not a guarantee.

Renogy Phoenix 200 portable power station
Battery capacity222 Wh
AC output200 W
Surge outputunknown
Battery chemistryLi-ion
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-07-10
Swipe table sideways
Renogy Phoenix 200: Key facts
Battery capacity222 Wh
Battery chemistryLi-ion
AC output200 W
Surge outputunknown
DC outputunknown
USB-C outputunknown
Solar input30 W
Weight2.4 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-07-10
Catalog notes (original English)

Solar input uses the official 30W maximum. Surge, DC, and USB-C output ceilings remain unknown because the checked official sources do not publish them.

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%1h 2m
Exceeds a tracked power limit — do not rely on these hours		EstimatedCalculator
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%4h 1m
Within the tracked power limits; compatibility still needs checking		EstimatedCalculator
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%5h 45m
Output or startup compatibility is not established		EstimatedCalculator
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%14h 39m
Within the tracked power limits; compatibility still needs checking		EstimatedCalculator
LED TV100 W · 100% · AC inverter · Reserve: 10%1h 42m
Within the tracked power limits; compatibility still needs checking		EstimatedCalculator
Adjust these assumptions in the runtime calculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 222 WhContinuous output rating (W): 200 WSurge output rating (W): n/a
Renogy Phoenix 200
Estimated runtime2h 50m1h 46m – 3h 31mEstimated runtime: 2h 50m, 1h 46m – 3h 31m
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

2h 50mEstimated runtime: 2h 50m

This setup is tight. Reduce load, use DC where possible, or choose a larger station.

Conservative1h 46m
Estimated2h 50m
Optimistic3h 31m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
222 Wh
Usable energy
170 Wh
222 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
2h 50m
170 Wh / 60 W = 2h 50m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

WattRunTime.com

WattRunTime estimate

Estimated runtime

2h 50mThis setup is tight. Reduce load, use DC where possible, or choose a larger station.
Usable energy170 Wh
Average load60 W
Fixed station overheadUnknown (not included)
Running watts60 W
Max surgen/a

Runtime range

Conservative1h 46m
Estimated2h 50m
Optimistic3h 31m

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Usable energy170 Wh222 Wh x 85% x 90% x 100% x 100%
Fixed station overheadUnknown (not included)60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime2h 50m170 Wh / 60 W = 2h 50m

Assumptions

  • 222 Wh nominal battery capacity
  • AC inverter output path
  • 85% conversion efficiency
  • 10% reserve kept unused
  • 60 W average load from 1 load
  • 100% battery health
  • 0% temperature loss
  • Fixed station overhead unknown; not included

Warnings

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Planning notes

  • Capacity class: 222 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 200 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: 30 W. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 2.4 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: Surge output, DC output, USB-C output

Models: Renogy

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources