PowerArQ PowerArQ mini 2 Runtime Calculator

Quick answer: the PowerArQ PowerArQ mini 2 stores 307 Wh and delivers up to 300 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 2.3 hours. Last source check: 2026-08-27. This is an estimate, not a guarantee.

PowerArQ PowerArQ mini 2 portable power station
Battery capacity307 Wh
AC output300 W
Surge output800 W
Battery chemistryunknown
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-08-27
Swipe table sideways
PowerArQ PowerArQ mini 2: Key facts
Battery capacity307 Wh
Battery chemistryunknown
AC output300 W
Surge output800 W
DC outputunknown
USB-C outputunknown
Solar inputunknown
Weightunknown
ConfidenceEstimated
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-08-27
Catalog notes (original English)

Weight, chemistry, USB-C, DC and solar ceilings stay unknown because this listing publishes none of them. PowerArQ is a Japan-market brand and this record follows its published 100V configuration; the official product page is in Japanese.

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%1h 25m
Exceeds a tracked power limit — do not rely on these hours
EstimatedCalculator
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%5h 33m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%7h 57m
Output or startup compatibility is not established
EstimatedCalculator
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%20h 16m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
LED TV100 W · 100% · AC inverter · Reserve: 10%2h 21m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 307 WhContinuous output rating (W): 300 WSurge output rating (W): 800 W
PowerArQ PowerArQ mini 2
Estimated runtime3h 55m2h 27m – 4h 52mEstimated runtime: 3h 55m, 2h 27m – 4h 52m
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

3h 55mEstimated runtime: 3h 55m

This setup is tight. Reduce load, use DC where possible, or choose a larger station.

Conservative2h 27m
Estimated3h 55m
Optimistic4h 52m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
307 Wh
Usable energy
235 Wh
307 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
3h 55m
235 Wh / 60 W = 3h 55m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Planning notes

  • Capacity class: 307 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 300 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: unknown. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: unknown. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: Battery chemistry, DC output, USB-C output, Solar input, Weight

Models: PowerArQ

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources