PowerArQ PowerArQ 3 Runtime Calculator

Quick answer: the PowerArQ PowerArQ 3 stores 555 Wh and delivers up to 500 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 4.2 hours. Last source check: 2026-08-27. This is an estimate, not a guarantee.

PowerArQ PowerArQ 3 portable power station
Battery capacity555 Wh
AC output500 W
Surge output1,000 W
Battery chemistryunknown
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-08-27
Swipe table sideways
PowerArQ PowerArQ 3: Key facts
Battery capacity555 Wh
Battery chemistryunknown
AC output500 W
Surge output1,000 W
DC outputunknown
USB-C output60 W
Solar input200 W
Weight7.9 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-08-27
Catalog notes (original English)

Weight stores the published body-plus-battery figure; the same table lists the removable battery alone at about 3.77kg. DC stays unknown because the table publishes a 12V/10A profile without a watt limit, and chemistry stays unknown because the table has no chemistry row. PowerArQ is a Japan-market brand and this record follows its published 100V configuration; the official product page is in Japanese.

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%2h 34m
Exceeds a tracked power limit — do not rely on these hours
EstimatedCalculator
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%10h 1m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%14h 22m
Exceeds a tracked power limit — do not rely on these hours
EstimatedCalculator
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%1d 12h
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
LED TV100 W · 100% · AC inverter · Reserve: 10%4h 15m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 555 WhContinuous output rating (W): 500 WSurge output rating (W): 1000 W
PowerArQ PowerArQ 3
Estimated runtime7h 5m4h 26m – 8h 47mEstimated runtime: 7h 5m, 4h 26m – 8h 47m
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

7h 5mEstimated runtime: 7h 5m

This setup may cover a partial outage or single overnight session. Add capacity for more margin.

Conservative4h 26m
Estimated7h 5m
Optimistic8h 47m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
555 Wh
Usable energy
425 Wh
555 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
7h 5m
425 Wh / 60 W = 7h 5m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Planning notes

  • Capacity class: 555 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 500 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: 200 W. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 7.9 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: Battery chemistry, DC output

Models: PowerArQ

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources