Menu
MARBERO M82 Runtime Calculator
Quick answer: the MARBERO M82 stores 88 Wh. Its continuous AC rating is not confirmed by a usable source, so this record keeps the field unknown rather than guessing — check the sources below before planning AC loads. Last source check: 2026-08-26. This is an estimate, not a guarantee.

| Battery capacity | 88 Wh |
|---|---|
| Battery chemistry | unknown |
| AC output | unknown |
| Surge output | unknown |
| DC output | unknown |
| USB-C output | unknown |
| Solar input | unknown |
| Weight | unknown |
| Confidence | Estimated |
| Lifecycle status | Unknown |
| Source region | Global/general sources |
| Last verified | 2026-08-26 |
Runtime estimate
Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.
| Device scenario | Planning default | Estimated runtime | Device scenario: Confidence | Models |
|---|---|---|---|---|
| Full-size refrigerator | 500 W · 33% · AC inverter · Reserve: 10% | 24m Output or startup compatibility is not established | Estimated | Calculator |
| CPAP without heated humidifier | 40 W · 100% · AC inverter · Reserve: 15% | 1h 35m Output or startup compatibility is not established | Estimated | Calculator |
| Starlink Mini | 32 W · 100% · USB-C PD · Reserve: 10% | 2h 17m Output or startup compatibility is not established | Estimated | Calculator |
| Wi-Fi router | 12 W · 100% · AC inverter · Reserve: 10% | 5h 48m Output or startup compatibility is not established | Estimated | Calculator |
| LED TV | 100 W · 100% · AC inverter · Reserve: 10% | 40m Output or startup compatibility is not established | Estimated | Calculator |
Runtime calculator
Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
Something blocked the calculator from starting. Check your connection or reload the page to try again.

Estimated runtime
Output or startup compatibility is not established
This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
1h 7mEstimated runtime: 1h 7mOutput or startup compatibility is not established
These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Output or startup compatibility is not established
- The selected station output rating is unknown, so running-load compatibility is not verified.
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
- Rated battery
- 88 Wh
- Usable energy
- 67 Wh
- 88 Wh x 85% x 90% x 100% x 100%
- Running watts
- 60 W
- Average load
- 60 W
- Max surge
- n/a
- Fixed station overhead
- Unknown (not included)
- 60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
- Estimated runtime
- 1h 7m
- 67 Wh / 60 W = 1h 7m
- Output path
- AC inverter
- Efficiency (%)
- 85
- Reserve kept unused (%)
- 10
- Battery health (%)
- 100
- Cold weather loss (%)
- 0
This link contains the numeric values you entered, but not custom load names.
WattRunTime.com
WattRunTime estimate
Estimated runtime
1h 7mOutput or startup compatibility is not establishedRuntime range
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
Assumptions
- 88 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 10% reserve kept unused
- 60 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
Warnings
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Output or startup compatibility is not established
- The selected station output rating is unknown, so running-load compatibility is not verified.
Share URL
Planning notes
- Capacity class: 88 Wh. Size the battery for your measured average load and required hours, including reserve.
- Tracked output: unknown. Compare both running demand and startup demand before using any runtime estimate.
- Solar input limit: unknown. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.
Known data gaps
- Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
- Weight: unknown. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
- unknown: Battery chemistry, AC output, Surge output, DC output, USB-C output, Solar input, Weight
Models: MARBERO
Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.
MARBERO M138
88.8 Wh · AC output: unknown · Confidence: Estimated
MARBERO PL60
88.8 Wh · AC output: 100 W · Confidence: Estimated
MARBERO PL100
118.4 Wh · AC output: 100 W · Confidence: Estimated
Sources
- MARBERO M82 official product page (Official; checked 2026-08-26)
