MARBERO M138 Runtime Calculator

Use this source-linked record to estimate runtime from tracked capacity, output, charging, and weight fields. Unknown specs stay unknown until an official or manufacturer-grade source confirms them.

Quick answer: the MARBERO M138 stores 88.8 Wh. Its continuous AC rating is not confirmed by a usable source, so this record keeps the field unknown rather than guessing — check the sources below before planning AC loads. Last source check: 2026-08-26. This is an estimate, not a guarantee.

MARBERO M138 portable power station
Capacity88.8 Wh
AC outputunknown
Surgeunknown
Chemistryunknown
ConfidenceEstimated
Source regionglobal/general
Checked2026-08-26
Swipe table sideways
Key specifications for MARBERO M138.
Battery capacity88.8 Wh
Battery chemistryunknown
AC outputunknown
Surge outputunknown
DC outputunknown
USB-C output30 W
Solar inputunknown
Weightunknown
ConfidenceEstimated
Lifecycle statusUnknown
Source regionglobal/general
Last verified2026-08-26
The legacy product handle says 240Wh, but the current title, variant, and page specification identify M138 as 88.8Wh; AC output is withheld because the outlet wording is ambiguous.

Runtime Starting Points

These are formula estimates using the tracked capacity, a 10% reserve, and each scenario's default wattage and duty cycle. They are planning starters, not measured runtimes.

Swipe table sideways
Runtime starting-point estimates for MARBERO M138.
ScenarioDefault loadEstimateScenario confidenceStation page
Full-size refrigerator500 W at 33%AC output unknownEstimatedUse calculator
CPAP without heated humidifier40 W at 100%AC output unknownEstimatedUse calculator
Starlink Mini32 W at 100%AC output unknownEstimatedUse calculator
Wi-Fi router12 W at 100%AC output unknownEstimatedUse calculator
LED TV100 W at 100%AC output unknownEstimatedUse calculator

Calculator for this station

Adjust watts, duty cycle, reserve, output path, and startup surge with MARBERO M138 prefilled from the source-linked specs above.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 89 WhContinuous output rating (W): n/aSurge output rating (W): n/a
MARBERO M138
Estimated runtime1h 8m43m – 1h 25mEstimated runtime: 1h 8m, 43m – 1h 25m
Output path

Estimated runtime

1h 8mEstimated runtime: 1h 8m

This setup is tight. Reduce load, use DC where possible, or choose a larger station.

Conservative43m
Estimated1h 8m
Optimistic1h 25m

Conservative assumes harder conditions; optimistic assumes favorable conditions.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
  • The selected station output rating is unknown, so running-load compatibility is not verified.

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
89 Wh
Usable energy
68 Wh
89 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
1h 8m
68 Wh / 60 W = 1h 8m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Good fit when

  • Capacity is a compact class; use it for small electronics and short essentials rather than high-wattage appliances.
  • AC output is unknown in the current source record, so do not assume it can run AC appliances.

Watch out for

  • Surge output is unknown, so do not assume compressor, pump, or power-tool startup will work.
  • Still unknown in the source-backed record: battery chemistry, ac output, surge output, dc output, solar input, weight.
  • Weight is unknown, so portability should not be inferred from this model page yet.
  • Confidence is not marked verified; keep the linked source context visible before making a purchase or emergency plan.

Related MARBERO Records

Nearby source-linked models from the same brand help you compare capacity, output, and unknown fields without leaving the data set.

PL60

88.8 Wh, 100 W AC output, confidence: Estimated.

M82

88 Wh, unknown AC output, confidence: Estimated.

PL100

118.4 Wh, 100 W AC output, confidence: Estimated.

Sources