Source-linked model

Jackery Explorer 300D Runtime Calculator

Use this source-linked record to estimate runtime from tracked capacity, output, charging, and weight fields. Unknown specs stay unknown until an official or manufacturer-grade source confirms them.

Jackery Explorer 300D portable power station
Capacity288 Wh
AC outputunknown
Surgeunknown
ChemistryLiFePO4
ConfidenceVerified
Source regionglobal/general
Checked2026-06-25
Swipe table sideways
Key specifications for Jackery Explorer 300D.
Battery capacity288 Wh
Battery chemistryLiFePO4
AC outputunknown
Surge outputunknown
DC output300 W
USB-C output140 W
Solar input100 W
Weight2.49 kg
ConfidenceVerified
Lifecycle statusUnknown
Source regionglobal/general
Last verified2026-06-25
DC-only model; AC output and AC surge are not applicable.

Runtime Starting Points

These are formula estimates using the tracked capacity, a 10% reserve, and each scenario's default wattage and duty cycle. They are planning starters, not measured runtimes.

Swipe table sideways
Runtime starting-point estimates for Jackery Explorer 300D.
ScenarioDefault loadEstimateScenario confidenceStation page
Full-size refrigerator500 W at 33%AC output unknownEstimatedUse calculator
CPAP without heated humidifier40 W at 100%AC output unknownEstimatedUse calculator
Starlink Mini32 W at 100%AC output unknownEstimatedUse calculator
Wi-Fi router12 W at 100%AC output unknownEstimatedUse calculator
LED TV100 W at 100%AC output unknownEstimatedUse calculator

Open calculator with this station

Calculator for this station

Adjust watts, duty cycle, reserve, output path, and startup surge with Jackery Explorer 300D prefilled from the source-linked specs above.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 288 WhContinuous output rating (W): n/aSurge output rating (W): n/a
Jackery Explorer 300D
Estimated runtime3h 40m2h 18m – 4h 34mEstimated runtime: 3h 40m, 2h 18m – 4h 34m
Output path

Estimated runtime

3h 40mEstimated runtime: 3h 40m

This setup is tight. Reduce load, use DC where possible, or choose a larger station.

Conservative2h 18m
Estimated3h 40m
Optimistic4h 34m

Conservative assumes harder conditions; optimistic assumes favorable conditions.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
  • The selected station output rating is unknown, so running-load compatibility is not verified.
Usable energy
220 Wh
Average load
60 W
Fixed station overhead
Unknown (not included)
Running watts
60 W
Max surge
n/a

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
288 Wh
Battery capacity (Wh): 288 Wh
Usable energy
220 Wh
288 Wh x 85% x 90% x 100% x 100%
Average load
60 W
60 W running, 60 W average after duty cycle and quantity
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
3h 40m
220 Wh / 60 W = 3h 40m
  • 288 Wh nominal battery capacity
  • AC inverter output path
  • 85% conversion efficiency
  • 10% reserve kept unused
  • 60 W average load from 1 load
  • 100% battery health
  • 0% temperature loss
  • Fixed station overhead unknown; not included

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Good fit when

  • Capacity is a compact class; use it for small electronics and short essentials rather than high-wattage appliances.
  • AC output is unknown in the current source record, so do not assume it can run AC appliances.
  • USB-C output is tracked at laptop-class power, useful for direct DC charging when the device supports it.
  • Tracked solar input is 100 W before panel, weather, angle, and controller losses.

Watch out for

  • Surge output is unknown, so do not assume compressor, pump, or power-tool startup will work.
  • Still unknown in the source-backed record: ac output, surge output.

Related Jackery Records

Nearby source-linked models from the same brand help you compare capacity, output, and unknown fields without leaving the data set.

Sources