Jackery Explorer 300 Runtime Calculator

Quick answer: the Jackery Explorer 300 stores 293.8 Wh and delivers up to 300 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 2.2 hours. Last source check: 2026-08-21. This is an estimate, not a guarantee.

Jackery Explorer 300 portable power station
Battery capacity293.8 Wh
AC output300 W
Surge output500 W
Battery chemistryLi-ion NMC
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-08-21
Swipe table sideways
Jackery Explorer 300: Key facts
Battery capacity293.8 Wh
Battery chemistryLi-ion NMC
AC output300 W
Surge output500 W
DC output120 W
USB-C output60 W
Solar inputunknown
Weight3.2 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-08-21
Catalog notes (original English)

The exact manual identifies a 90W wall adapter and recommends one SolarSaga 100 panel, but neither the manual nor the current support table publishes a solar-input watt ceiling. Compatibility and recharge timing are not treated as that ceiling, and voltage/current ranges are not multiplied into an inferred value, so solar input remains unknown.

Measurement Records

Third-party results apply to the listed model, output path and test load. The delta is against a fixed no-reserve planning formula, not an error score or a prediction at other loads. Missing test conditions remain unknown.

Swipe table sideways
Measurement Records: Jackery Explorer 300
TestMeasureddefault planning estimateVs estimateSource
Capacity test (AC)
Average test load: unknown
test date unknown
260 Wh
89%
250 Wh+10 Wh (+4%)OutdoorGearLab Best Power Stations of 2026
source date unknown; accessed 2026-09-04

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%1h 22m
Exceeds a tracked power limit — do not rely on these hours
EstimatedCalculator
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%5h 18m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%7h 36m
Exceeds a tracked power limit — do not rely on these hours
EstimatedCalculator
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%19h 23m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator
LED TV100 W · 100% · AC inverter · Reserve: 10%2h 15m
Within the tracked power limits; compatibility still needs checking
EstimatedCalculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 294 WhContinuous output rating (W): 300 WSurge output rating (W): 500 W
Jackery Explorer 300
Estimated runtime3h 45m2h 21m – 4h 39mEstimated runtime: 3h 45m, 2h 21m – 4h 39m
Output path

Estimated runtime

Within the tracked power limits; compatibility still needs checking

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

3h 45mEstimated runtime: 3h 45m

This setup is tight. Reduce load, use DC where possible, or choose a larger station.

Conservative2h 21m
Estimated3h 45m
Optimistic4h 39m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Within the tracked power limits; compatibility still needs checking

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
294 Wh
Usable energy
225 Wh
294 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
3h 45m
225 Wh / 60 W = 3h 45m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Planning notes

  • Capacity class: 293.8 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: 300 W. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: unknown. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 3.2 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: Solar input

Models: Jackery

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources