Menu
Inergy Flex DC Runtime Calculator
Quick answer: the Inergy Flex DC stores 1,000 Wh. Its continuous AC rating is not confirmed by a usable source, so this record keeps the field unknown rather than guessing — check the sources below before planning AC loads. Last source check: 2026-08-27. This is an estimate, not a guarantee.
Battery capacity1,000 Wh
AC outputunknown
Surge outputunknown
Battery chemistryLi-ion NMC
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-08-27
Swipe table sideways
| Battery capacity | 1,000 Wh |
|---|---|
| Battery chemistry | Li-ion NMC |
| AC output | unknown |
| Surge output | unknown |
| DC output | unknown |
| USB-C output | 60 W |
| Solar input | unknown |
| Weight | 12 kg |
| Confidence | Estimated |
| Lifecycle status | Unknown |
| Source region | Global/general sources |
| Last verified | 2026-08-27 |
Catalog notes (original English)
This is a DC-only station with no AC inverter, so AC and surge stay unknown. DC stays unknown because the page publishes a 60A combined ceiling across all ports rather than a single-path watt limit.
Runtime estimate
Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.
Swipe table sideways
| Device scenario | Planning default | Estimated runtime | Device scenario: Confidence | Models |
|---|---|---|---|---|
| Full-size refrigerator | 500 W · 33% · AC inverter · Reserve: 10% | 4h 38m Output or startup compatibility is not established | Estimated | Calculator |
| CPAP without heated humidifier | 40 W · 100% · AC inverter · Reserve: 15% | 18h 4m Output or startup compatibility is not established | Estimated | Calculator |
| Starlink Mini | 32 W · 100% · USB-C PD · Reserve: 10% | 1d 1h Exceeds a tracked power limit — do not rely on these hours | Estimated | Calculator |
| Wi-Fi router | 12 W · 100% · AC inverter · Reserve: 10% | 2d 18h Output or startup compatibility is not established | Estimated | Calculator |
| LED TV | 100 W · 100% · AC inverter · Reserve: 10% | 7h 39m Output or startup compatibility is not established | Estimated | Calculator |
Runtime calculator
Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
Loading calculatorPreparing calculator
This tool didn't load
Something blocked the calculator from starting. Check your connection or reload the page to try again.
Power station model
Battery capacity (Wh): 1000 WhContinuous output rating (W): n/aSurge output rating (W): n/a
Estimated runtime12h 45m7h 59m – 15h 50mEstimated runtime: 12h 45m, 7h 59m – 15h 50m
Output path
Estimated runtime
Output or startup compatibility is not established
This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
12h 45mEstimated runtime: 12h 45mOutput or startup compatibility is not established
Conservative7h 59m
Estimated12h 45m
Optimistic15h 50m
These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Output or startup compatibility is not established
- The selected station output rating is unknown, so running-load compatibility is not verified.
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
- Rated battery
- 1000 Wh
- Usable energy
- 765 Wh
- 1000 Wh x 85% x 90% x 100% x 100%
- Running watts
- 60 W
- Average load
- 60 W
- Max surge
- n/a
- Fixed station overhead
- Unknown (not included)
- 60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
- Estimated runtime
- 12h 45m
- 765 Wh / 60 W = 12h 45m
- Output path
- AC inverter
- Efficiency (%)
- 85
- Reserve kept unused (%)
- 10
- Battery health (%)
- 100
- Cold weather loss (%)
- 0
This link contains the numeric values you entered, but not custom load names.
Source-Backed Next Steps
Smallest matching record (8h)Jackery Explorer 600 Plus
WattRunTime.com
WattRunTime estimate
Estimated runtime
12h 45mOutput or startup compatibility is not establishedUsable energy765 Wh
Average load60 W
Fixed station overheadUnknown (not included)
Running watts60 W
Max surgen/a
Runtime range
Conservative7h 59m
Estimated12h 45m
Optimistic15h 50m
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
Usable energy765 Wh1000 Wh x 85% x 90% x 100% x 100%
Fixed station overheadUnknown (not included)60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime12h 45m765 Wh / 60 W = 12h 45m
Assumptions
- 1000 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 10% reserve kept unused
- 60 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
Warnings
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Output or startup compatibility is not established
- The selected station output rating is unknown, so running-load compatibility is not verified.
Share URL
Planning notes
- Capacity class: 1,000 Wh. Size the battery for your measured average load and required hours, including reserve.
- Tracked output: unknown. Compare both running demand and startup demand before using any runtime estimate.
- Solar input limit: unknown. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.
Known data gaps
- Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
- Weight: 12 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
- unknown: AC output, Surge output, DC output, Solar input
Models: Inergy
Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.
Inergy Flex 1500 TL
1,000 Wh · AC output: 1,500 W · Confidence: Estimated
Inergy Flex Tactical 1500
1,058 Wh · AC output: 1,500 W · Confidence: Estimated
Inergy Kodiak
1,100 Wh · AC output: 1,500 W · Confidence: Estimated
Sources
- Inergy Flex DC official product page (Official; checked 2026-08-27)