3d 19h
Estimated runtime for starlink mini.
Model by device runtime
EcoFlow DELTA Pro Starlink Mini Runtime Estimate
A Starlink Mini day-planning estimate using the DELTA Pro USB-C output path. The estimate uses the same runtime engine as the main calculator and keeps source confidence visible.
meets this planning target
24-hour planning target.
USB-C PD
Output path with 100 W tracked output limit.
This estimate assumes 32 W running draw, 100% duty cycle, 90% efficiency, and 10% reserve.
Runtime Range
Use the range to plan around temperature, battery condition, and measurement uncertainty.
Conservative2d 9h
Estimated3d 19h
Optimistic4d 16h
Assumptions
These are calculation inputs, not lab-tested runtime claims.
- 3600 Wh nominal battery capacity
- USB-C PD output path
- 90% conversion efficiency
- 10% reserve kept unused
- 32 W average load from 1 load
- 100% battery health
- 0% temperature loss
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Sources
Station facts and scenario wattage notes stay separated so the estimate is easier to audit.
Station Sources
- EcoFlow DELTA Pro specifications (official)
Scenario Sources
- Starlink specifications (official)
Confidence
- Station: verified
- Scenario: estimated
- Last station verification: 2026-06-24
Next Steps
Refine this estimate if your actual device wattage or power path is different.
Adjust the calculator
Review the model
Review the scenario
FAQ
Short answers for this model and device pair.
How long will EcoFlow DELTA Pro run starlink mini?
Using the current assumptions, the estimate is 3d 19h. Real runtime depends on device settings, output path, temperature, battery age, and measured wattage.
Is this a guaranteed runtime?
No. It is a planning estimate from source-linked station specs and scenario wattage assumptions. Use a watt meter and manufacturer guidance for critical backup planning.