Scenario-anchored comparison

Anker SOLIX C1000 vs EcoFlow DELTA 2 for Full-size refrigerator

Same device load, same runtime assumptions, and source-backed station specs. This is a planning estimate, not a measured runtime test.

Scenario verdict

Full-size refrigerator: 500 W · 33%

Neither station clears the known load checks

A runtime shown beside a failed or unknown fit is conditional: it applies only if the load starts and stays within the station limits.

Anker SOLIX C1000

  • Overall load fit: Does not fit
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,400 W · Fit: Does not fit
  • Modeled runtime: 4h 54m (if the load starts)

EcoFlow DELTA 2

  • Overall load fit: Does not fit
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,700 W · Fit: Does not fit
  • Modeled runtime: 4h 45m (if the load starts)

Specification comparison

A runtime shown beside a failed or unknown fit is conditional: it applies only if the load starts and stays within the station limits.

Swipe table sideways
Specification comparison
Key factsAnker SOLIX C1000EcoFlow DELTA 2
Modeled runtime4h 54m (if the load starts)4h 45m (if the load starts)
Overall load fitDoes not fitDoes not fit
Battery capacity1,056 Wh1,024 Wh
AC output1,800 W1,800 W
AC output · FitPassPass
Device startup demand2,900 W2,900 W
Surge output2,400 W2,700 W
Surge output · FitDoes not fitDoes not fit

Planning inputs and evidence

The same source-backed load and calculation assumptions are used for both stations.

Load assumptions

  • Typical wattage range: 300-800 W
  • Planning default: 500 W
  • Device startup demand: 2,900 W
  • Average load: 33%
  • AC output: AC · 85%
  • Reserve: 10%
  • Confidence: Estimated

Check sources and assumptions

Open the parent records before using this estimate for a purchase or backup plan.

Full-size refrigerator

Fridges cycle on and off. The calculator treats the entered wattage as compressor running wattage and applies a duty-cycle estimate.