Scenario-anchored comparison

Anker SOLIX C1000 vs EcoFlow DELTA 2 for CPAP without heated humidifier

Same device load, same runtime assumptions, and source-backed station specs. This is a planning estimate, not a measured runtime test.

Scenario verdict

CPAP without heated humidifier: 40 W · 100%

Anker SOLIX C1000 has the longer modeled runtime

Both stations pass the available continuous and startup checks. Anker SOLIX C1000 estimates 20h 12m; EcoFlow DELTA 2 estimates 19h 35m.

Anker SOLIX C1000

  • Overall load fit: Pass
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,400 W · Fit: Not required
  • Modeled runtime: 20h 12m

EcoFlow DELTA 2

  • Overall load fit: Pass
  • AC output: 1,800 W · Fit: Pass
  • Surge output: 2,700 W · Fit: Not required
  • Modeled runtime: 19h 35m

Specification comparison

A runtime shown beside a failed or unknown fit is conditional: it applies only if the load starts and stays within the station limits.

Swipe table sideways
Specification comparison
Key factsAnker SOLIX C1000EcoFlow DELTA 2
Modeled runtime20h 12m19h 35m
Overall load fitPassPass
Battery capacity1,056 Wh1,024 Wh
AC output1,800 W1,800 W
AC output · FitPassPass
Device startup demandNot requiredNot required
Surge output2,400 W2,700 W
Surge output · FitNot requiredNot required

Planning inputs and evidence

The same source-backed load and calculation assumptions are used for both stations.

Load assumptions

  • Typical wattage range: 30-60 W
  • Planning default: 40 W
  • Device startup demand: Not required
  • Average load: 100%
  • AC output: AC · 85%
  • Reserve: 10%
  • Confidence: Estimated

Check sources and assumptions

Open the parent records before using this estimate for a purchase or backup plan.

CPAP without heated humidifier

Humidifiers and heated tubes can more than double power draw. Users should check their device label and prescription setup. This is a comfort-focused estimate, not medical advice. Use the device manufacturer's battery guidance for critical backup planning.