Menu
Powkey R1000 Runtime Calculator
Use this source-linked record to estimate runtime from tracked capacity, output, charging, and weight fields. Unknown specs stay unknown until an official or manufacturer-grade source confirms them.
Quick answer: the Powkey R1000 stores 740 Wh and delivers up to 1,000 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 5.7 hours. Last source check: 2026-08-27. This is an estimate, not a guarantee.
| Battery capacity | 740 Wh |
|---|---|
| Battery chemistry | Li-ion NMC |
| AC output | 1,000 W |
| Surge output | unknown |
| DC output | unknown |
| USB-C output | unknown |
| Solar input | unknown |
| Weight | 8.3 kg |
| Confidence | Estimated |
| Lifecycle status | Unknown |
| Source region | global/general |
| Last verified | 2026-08-27 |
Runtime Starting Points
These are formula estimates using the tracked capacity, a 10% reserve, and each scenario's default wattage and duty cycle. They are planning starters, not measured runtimes.
| Scenario | Default load | Estimate | Scenario confidence | Station page |
|---|---|---|---|---|
| Full-size refrigerator | 500 W at 33% | 3h 26m | Estimated | Use calculator |
| CPAP without heated humidifier | 40 W at 100% | 14h 9m | Estimated | Use calculator |
| Starlink Mini | 32 W at 100% | 18h 44m | Estimated | Use calculator |
| Wi-Fi router | 12 W at 100% | 2d 0h | Estimated | Use calculator |
| LED TV | 100 W at 100% | 5h 40m | Estimated | Use calculator |
Calculator for this station
Adjust watts, duty cycle, reserve, output path, and startup surge with Powkey R1000 prefilled from the source-linked specs above.
Something blocked the calculator from starting. Check your connection or reload the page to try again.
Estimated runtime
9h 26mEstimated runtime: 9h 26mThis setup may cover a partial outage or single overnight session. Add capacity for more margin.
Conservative assumes harder conditions; optimistic assumes favorable conditions.
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
- Rated battery
- 740 Wh
- Usable energy
- 566 Wh
- 740 Wh x 85% x 90% x 100% x 100%
- Running watts
- 60 W
- Average load
- 60 W
- Max surge
- n/a
- Fixed station overhead
- Unknown (not included)
- 60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
- Estimated runtime
- 9h 26m
- 566 Wh / 60 W = 9h 26m
- Output path
- AC inverter
- Efficiency (%)
- 85
- Reserve kept unused (%)
- 10
- Battery health (%)
- 100
- Cold weather loss (%)
- 0
This link contains the numeric values you entered, but not custom load names.
WattRunTime.com
WattRunTime estimate
Estimated runtime
9h 26mThis setup may cover a partial outage or single overnight session. Add capacity for more margin.Runtime range
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
Assumptions
- 740 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 10% reserve kept unused
- 60 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
Warnings
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Share URL
Good fit when
- Capacity is best suited to lighter essentials such as routers, laptops, CPAP planning, lights, and smaller camping loads.
- Tracked AC output is 1,000 W, so high-draw appliances and tools need careful filtering.
Watch out for
- Surge output is unknown, so do not assume compressor, pump, or power-tool startup will work.
- Still unknown in the source-backed record: surge output, dc output, usb-c output, solar input.
- Confidence is not marked verified; keep the linked source context visible before making a purchase or emergency plan.
Related Powkey Records
Nearby source-linked models from the same brand help you compare capacity, output, and unknown fields without leaving the data set.
Sources
- Powkey R1000 official product page (official; checked 2026-08-27)
