18h 2m
Estimated runtime for cpap without heated humidifier.
Model by device runtime
Goal Zero Yeti 1000 LiFePO4 CPAP Runtime Estimate
A LiFePO4 Goal Zero CPAP runtime check with conservative reserve. The estimate uses the same runtime engine as the main calculator and keeps source confidence visible.
meets this planning target
8-hour planning target.
AC inverter
Output path with 2000 W tracked output limit.
This estimate assumes 40 W running draw, 100% duty cycle, 85% efficiency, and 15% reserve.
Runtime Range
Use the range to plan around temperature, battery condition, and measurement uncertainty.
Conservative11h 12m
Estimated18h 2m
Optimistic22h 28m
Assumptions
These are calculation inputs, not lab-tested runtime claims.
- 998 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 15% reserve kept unused
- 40 W average load from 1 load
- 100% battery health
- 0% temperature loss
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Sources
Station facts and scenario wattage notes stay separated so the estimate is easier to audit.
Station Sources
- Goal Zero Yeti 1000 LiFePO4 specifications (official)
Scenario Sources
- Jackery CPAP wattage guide (editorial)
Confidence
- Station: verified
- Scenario: estimated
- Last station verification: 2026-06-24
Next Steps
Refine this estimate if your actual device wattage or power path is different.
Adjust the calculator
Review the model
Review the scenario
FAQ
Short answers for this model and device pair.
How long will Goal Zero Yeti 1000 LiFePO4 run cpap without heated humidifier?
Using the current assumptions, the estimate is 18h 2m. Real runtime depends on device settings, output path, temperature, battery age, and measured wattage.
Is this a guaranteed runtime?
No. It is a planning estimate from source-linked station specs and scenario wattage assumptions. Use a watt meter and manufacturer guidance for critical backup planning.