Menu
EcoFlow RIVER 3 Plus Runtime Calculator
Quick answer: the EcoFlow RIVER 3 Plus stores 286 Wh and delivers up to 600 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 2.2 hours. Last source check: 2026-08-21. This is an estimate, not a guarantee.

| Battery capacity | 286 Wh |
|---|---|
| Battery chemistry | LiFePO4 |
| AC output | 600 W |
| Surge output | 1,200 W |
| DC output | 126 W |
| USB-C output | 100 W |
| Solar input | 220 W |
| Weight | 4.7 kg |
| Confidence | Verified |
| Lifecycle status | Unknown |
| Source region | US source |
| Last verified | 2026-08-21 |
The 1,200W value is retained because EcoFlow's exact table labels surge separately from the 600W rated output; the same numeric X-Boost ceiling is not used as the evidence by itself.
Runtime estimate
Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.
| Device scenario | Planning default | Estimated runtime | Device scenario: Confidence | Models |
|---|---|---|---|---|
| Starlink Mini | 32 W · 100% · USB-C PD · Reserve: 10% | 7h 24m Within the tracked power limits; compatibility still needs checking | Estimated | Open estimate |
Runtime calculator
Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
Something blocked the calculator from starting. Check your connection or reload the page to try again.

Estimated runtime
Within the tracked power limits; compatibility still needs checking
This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
3h 39mEstimated runtime: 3h 39mThis setup is tight. Reduce load, use DC where possible, or choose a larger station.
These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Within the tracked power limits; compatibility still needs checking
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
- Rated battery
- 286 Wh
- Usable energy
- 219 Wh
- 286 Wh x 85% x 90% x 100% x 100%
- Running watts
- 60 W
- Average load
- 60 W
- Max surge
- n/a
- Fixed station overhead
- Unknown (not included)
- 60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
- Estimated runtime
- 3h 39m
- 219 Wh / 60 W = 3h 39m
- Output path
- AC inverter
- Efficiency (%)
- 85
- Reserve kept unused (%)
- 10
- Battery health (%)
- 100
- Cold weather loss (%)
- 0
This link contains the numeric values you entered, but not custom load names.
WattRunTime.com
WattRunTime estimate
Estimated runtime
3h 39mThis setup is tight. Reduce load, use DC where possible, or choose a larger station.Runtime range
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
Assumptions
- 286 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 10% reserve kept unused
- 60 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
Warnings
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
- Within the tracked power limits; compatibility still needs checking
Share URL
Planning notes
- Capacity class: 286 Wh. Size the battery for your measured average load and required hours, including reserve.
- Tracked output: 600 W. Compare both running demand and startup demand before using any runtime estimate.
- Solar input limit: 220 W. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.
Known data gaps
- Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
- Weight: 4.7 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
- unknown: —
Models: EcoFlow
Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.
EcoFlow TRAIL 300 DC
288 Wh · AC output: unknown · Confidence: Verified
EcoFlow TRAIL Plus 300 DC
288 Wh · AC output: unknown · Confidence: Verified
EcoFlow RIVER
288 Wh · AC output: 600 W · Confidence: Estimated
Specification comparison
Use these as planning shortcuts, then confirm the full table and sources.
EcoFlow RIVER 3 Plus vs Anker SOLIX C300
286 Wh / 288 Wh · AC output: 600 W / 300 W
BLUETTI AC50B vs EcoFlow RIVER 3 Plus
448 Wh / 286 Wh · AC output: 700 W / 600 W
Sources
- EcoFlow RIVER 3 Plus specifications (Official; checked 2026-08-21)
- EcoFlow RIVER 3 Plus US product specifications (Official; checked 2026-08-21)
