BLUETTI X30 Runtime Calculator

Quick answer: the BLUETTI X30 stores 297 Wh. Its continuous AC rating is not confirmed by a usable source, so this record keeps the field unknown rather than guessing — check the sources below before planning AC loads. Last source check: 2026-08-27. This is an estimate, not a guarantee.

BLUETTI X30 portable power station
Battery capacity297 Wh
AC outputunknown
Surge outputunknown
Battery chemistryLi-ion NMC
ConfidenceEstimated
Source regionGlobal/general sources
checked2026-08-27
Swipe table sideways
BLUETTI X30: Key facts
Battery capacity297 Wh
Battery chemistryLi-ion NMC
AC outputunknown
Surge outputunknown
DC output60 W
USB-C outputunknown
Solar inputunknown
Weight1.8 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionGlobal/general sources
Last verified2026-08-27
Catalog notes (original English)

The X30 is a DC-only CPAP power bank with no AC inverter, so AC output stays unknown rather than being recorded as zero; DC output is derived from the published 12V/5A DC5525 rating. BLUETTI states it is designed for about 90% of CPAP machines, not all of them: confirm your specific machine's DC voltage and connector with the CPAP manufacturer before relying on it for therapy backup, and never treat an estimated runtime as a substitute for the manufacturer's own guidance on critical medical equipment.

Runtime estimate

Formula starting points use each scenario’s default watts, duty cycle and output path, with 10% reserve or 15% for CPAP. Linked detail pages use the same inputs. Hours apply only if the device can run and start; they are not measured runtimes.

Swipe table sideways
Runtime estimate
Device scenarioPlanning defaultEstimated runtimeDevice scenario: ConfidenceModels
Full-size refrigerator500 W · 33% · AC inverter · Reserve: 10%1h 23m
Output or startup compatibility is not established
EstimatedCalculator
CPAP without heated humidifier40 W · 100% · AC inverter · Reserve: 15%5h 22m
Output or startup compatibility is not established
EstimatedCalculator
Starlink Mini32 W · 100% · USB-C PD · Reserve: 10%7h 41m
Output or startup compatibility is not established
EstimatedCalculator
Wi-Fi router12 W · 100% · AC inverter · Reserve: 10%19h 36m
Output or startup compatibility is not established
EstimatedCalculator
LED TV100 W · 100% · AC inverter · Reserve: 10%2h 16m
Output or startup compatibility is not established
EstimatedCalculator

Runtime calculator

Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 297 WhContinuous output rating (W): n/aSurge output rating (W): n/a
BLUETTI X30
Estimated runtime3h 47m2h 22m – 4h 42mEstimated runtime: 3h 47m, 2h 22m – 4h 42m
Output path

Estimated runtime

Output or startup compatibility is not established

This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.

3h 47mEstimated runtime: 3h 47m

Output or startup compatibility is not established

Conservative2h 22m
Estimated3h 47m
Optimistic4h 42m

These are calculated sensitivity cases, not a statistical confidence interval. Conservative uses lower efficiency and battery health, more reserve/temperature loss and higher load; optimistic changes these assumptions in the opposite direction.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior. Runtime is conditional on successful startup, compatible voltage/connectors and sufficient output. Verify the actual device setup before relying on these hours.
  • Output or startup compatibility is not established
  • The selected station output rating is unknown, so running-load compatibility is not verified.

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
297 Wh
Usable energy
227 Wh
297 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
3h 47m
227 Wh / 60 W = 3h 47m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Planning notes

  • Capacity class: 297 Wh. Size the battery for your measured average load and required hours, including reserve.
  • Tracked output: unknown. Compare both running demand and startup demand before using any runtime estimate.
  • Solar input limit: unknown. Actual refill depends on panel voltage/current compatibility, sunlight, angle and charging losses.

Known data gaps

  • Unverified or missing specifications remain visible. The confidence label describes the station record, not a tested runtime or approval for emergency use.
  • Weight: 1.8 kg. Check the complete carrying setup, cables and battery extensions before choosing this model for travel.
  • unknown: AC output, Surge output, USB-C output, Solar input

Models: BLUETTI

Compare nearby capacity records from the same brand, then check output, weight and missing fields. A larger battery does not establish device compatibility.

Sources