ATEM POWER AP500X Runtime Calculator

Use this source-linked record to estimate runtime from tracked capacity, output, charging, and weight fields. Unknown specs stay unknown until an official or manufacturer-grade source confirms them.

Quick answer: the ATEM POWER AP500X stores 518 Wh and delivers up to 500 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 4.0 hours. Last source check: 2026-08-27. This is an estimate, not a guarantee.

ATEM POWER AP500X portable power station
Capacity518 Wh
AC output500 W
Surge1,000 W
ChemistryLi-ion NMC
ConfidenceEstimated
Source regionglobal/general
Checked2026-08-27
Swipe table sideways
Key specifications for ATEM POWER AP500X.
Battery capacity518 Wh
Battery chemistryLi-ion NMC
AC output500 W
Surge output1,000 W
DC output120 W
USB-C output60 W
Solar input100 W
Weight5.58 kg
ConfidenceEstimated
Lifecycle statusUnknown
Source regionglobal/general
Last verified2026-08-27
Solar input stores the published 100W MPPT controller ceiling. This is an Australian-market brand and the record follows its published configuration.

Runtime Starting Points

These are formula estimates using the tracked capacity, a 10% reserve, and each scenario's default wattage and duty cycle. They are planning starters, not measured runtimes.

Swipe table sideways
Runtime starting-point estimates for ATEM POWER AP500X.
ScenarioDefault loadEstimateScenario confidenceStation page
Full-size refrigerator500 W at 33%2h 24mEstimatedUse calculator
CPAP without heated humidifier40 W at 100%9h 54mEstimatedUse calculator
Starlink Mini32 W at 100%13h 7mEstimatedUse calculator
Wi-Fi router12 W at 100%1d 10hEstimatedUse calculator
LED TV100 W at 100%3h 58mEstimatedUse calculator

Calculator for this station

Adjust watts, duty cycle, reserve, output path, and startup surge with ATEM POWER AP500X prefilled from the source-linked specs above.

Loading calculatorPreparing calculator
Power station model
Battery capacity (Wh): 518 WhContinuous output rating (W): 500 WSurge output rating (W): 1000 W
ATEM POWER AP500X
Estimated runtime6h 36m4h 8m – 8h 12mEstimated runtime: 6h 36m, 4h 8m – 8h 12m
Output path

Estimated runtime

6h 36mEstimated runtime: 6h 36m

This setup may cover a partial outage or single overnight session. Add capacity for more margin.

Conservative4h 8m
Estimated6h 36m
Optimistic8h 12m

Conservative assumes harder conditions; optimistic assumes favorable conditions.

  • This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.

Show your work

Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.

Rated battery
518 Wh
Usable energy
396 Wh
518 Wh x 85% x 90% x 100% x 100%
Running watts
60 W
Average load
60 W
Max surge
n/a
Fixed station overhead
Unknown (not included)
60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
Estimated runtime
6h 36m
396 Wh / 60 W = 6h 36m
Output path
AC inverter
Efficiency (%)
85
Reserve kept unused (%)
10
Battery health (%)
100
Cold weather loss (%)
0

This link contains the numeric values you entered, but not custom load names.

Source-Backed Next Steps

Good fit when

  • Capacity is best suited to lighter essentials such as routers, laptops, CPAP planning, lights, and smaller camping loads.
  • Tracked AC output is 500 W, so high-draw appliances and tools need careful filtering.
  • USB-C output is tracked at laptop-class power, useful for direct DC charging when the device supports it.
  • Tracked solar input is 100 W before panel, weather, angle, and controller losses.

Watch out for

  • Surge output is tracked, but device startup behavior should still be checked against the actual load.
  • Confidence is not marked verified; keep the linked source context visible before making a purchase or emergency plan.

Sources