Menu
Ampace Andes 300 Runtime Calculator
Use this source-linked record to estimate runtime from tracked capacity, output, charging, and weight fields. Unknown specs stay unknown until an official or manufacturer-grade source confirms them.
Quick answer: the Ampace Andes 300 stores 266 Wh and delivers up to 300 W of continuous AC power. Under this site's planning assumptions (85% inverter efficiency, 10% reserve), a steady 100 W AC load runs for roughly 2.0 hours. Last source check: 2026-08-26. This is an estimate, not a guarantee.
| Battery capacity | 266 Wh |
|---|---|
| Battery chemistry | unknown |
| AC output | 300 W |
| Surge output | unknown |
| DC output | 120 W |
| USB-C output | 100 W |
| Solar input | 100 W |
| Weight | unknown |
| Confidence | Estimated |
| Lifecycle status | Unknown |
| Source region | global/general |
| Last verified | 2026-08-26 |
Runtime Starting Points
These are formula estimates using the tracked capacity, a 10% reserve, and each scenario's default wattage and duty cycle. They are planning starters, not measured runtimes.
| Scenario | Default load | Estimate | Scenario confidence | Station page |
|---|---|---|---|---|
| Full-size refrigerator | 500 W at 33% | above tracked AC output | Estimated | Use calculator |
| CPAP without heated humidifier | 40 W at 100% | 5h 5m | Estimated | Use calculator |
| Starlink Mini | 32 W at 100% | 6h 44m | Estimated | Use calculator |
| Wi-Fi router | 12 W at 100% | 17h 33m | Estimated | Use calculator |
| LED TV | 100 W at 100% | 2h 2m | Estimated | Use calculator |
Calculator for this station
Adjust watts, duty cycle, reserve, output path, and startup surge with Ampace Andes 300 prefilled from the source-linked specs above.
Something blocked the calculator from starting. Check your connection or reload the page to try again.
Estimated runtime
3h 23mEstimated runtime: 3h 23mThis setup is tight. Reduce load, use DC where possible, or choose a larger station.
Conservative assumes harder conditions; optimistic assumes favorable conditions.
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
- Rated battery
- 266 Wh
- Usable energy
- 203 Wh
- 266 Wh x 85% x 90% x 100% x 100%
- Running watts
- 60 W
- Average load
- 60 W
- Max surge
- n/a
- Fixed station overhead
- Unknown (not included)
- 60 W / 85% = 70.6 W battery draw; fixed overhead is unknown and excluded
- Estimated runtime
- 3h 23m
- 203 Wh / 60 W = 3h 23m
- Output path
- AC inverter
- Efficiency (%)
- 85
- Reserve kept unused (%)
- 10
- Battery health (%)
- 100
- Cold weather loss (%)
- 0
This link contains the numeric values you entered, but not custom load names.
WattRunTime.com
WattRunTime estimate
Estimated runtime
3h 23mThis setup is tight. Reduce load, use DC where possible, or choose a larger station.Runtime range
Show your work
Rated Wh is reduced by efficiency, reserve, battery health, and temperature before it is divided by average load.
Assumptions
- 266 Wh nominal battery capacity
- AC inverter output path
- 85% conversion efficiency
- 10% reserve kept unused
- 60 W average load from 1 load
- 100% battery health
- 0% temperature loss
- Fixed station overhead unknown; not included
Warnings
- This is an estimate. Real runtime changes with load, temperature, battery age, AC/DC output, and device behavior.
Share URL
Good fit when
- Capacity is a compact class; use it for small electronics and short essentials rather than high-wattage appliances.
- Tracked AC output is 300 W, so high-draw appliances and tools need careful filtering.
- USB-C output is tracked at laptop-class power, useful for direct DC charging when the device supports it.
- Tracked solar input is 100 W before panel, weather, angle, and controller losses.
Watch out for
- Surge output is unknown, so do not assume compressor, pump, or power-tool startup will work.
- Still unknown in the source-backed record: battery chemistry, surge output, weight.
- Weight is unknown, so portability should not be inferred from this model page yet.
- Confidence is not marked verified; keep the linked source context visible before making a purchase or emergency plan.
Related Ampace Records
Nearby source-linked models from the same brand help you compare capacity, output, and unknown fields without leaving the data set.
Andes 600 Pro
584 Wh, 600 W AC output, confidence: Estimated.
Andes 1500
1,462 Wh, 2,400 W AC output, confidence: Estimated.
Sources
- Ampace Andes 300 official product page (official; checked 2026-08-26)
